Adjusting The Audio; Muting The Sound; Using The Digital Audio Selector; Selecting Stereo/Sap Broadcasts - Toshiba 32HLX95 Owner's Manual

Adjusting the audio

Muting the sound

Press MUTE to partially reduce (1/2 Mute) or turn off (Mute)
the sound. Each time you press MUTE, the mute mode will
change in the following order.
→ 1/2 Mute → Mute → Volume →
If the closed caption mode is set to Off when you select "Mute"
mode, the closed caption feature is automatically activated. To
mute the audio without automatically activating the closed
caption feature, use VOL z to set the volume to 0. See "Using
the closed caption mode" on page 72 for more information on
closed caption modes.

Using the digital audio selector

You can use the Digital CC/Audio selector to conveniently
switch between audio tracks on a digital channel (for those
channels that have multiple audio tracks). This temporarily
overrides the audio track chosen by the language option under
Audio Setup (see "Selecting stereo/SAP broadcasts," at right).
To use the digital audio selector:
1. Press MENU and open
the Applications menu.
2. Highlight Digital CC/
Audio Selector and press
ENTER.
3. Press yz to select
Audio, and then press x
• to select the desired
service.
74
Chapter 8: Using the TV's features
VOL z
MUTE
Applications
TV Guide On Screen
Digital CC/Audio Selector
CableCARD
Navigate Select CH RTN Back EXIT Exit
Audio CC 1
Service 1
Closed Caption
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music, or other audio information (when provided by individual
stations).
The MTS feature is not available when the TV is in VIDEO
mode. When the TV receives a stereo or SAP broadcast, the
word "STEREO" or "SAP" appears on-screen when RECALL is
pressed.
To listen to stereo sound:
1. Press MENU and
open the Audio menu.
2. Highlight Audio Setup
and press ENTER.
3. Press z to highlight
the MTS field, and then press x • to select Stereo.
Audio Setup
MTS Stereo
Language English
Speakers
Optical Output Format Dolby Digital/Surround
DVD Audio
Reset Done
4. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
Note:
• You can leave the TV in Stereo mode because it automatically
outputs the type of sound being broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to reduce the noise.
To listen to an alternate language on an ATSC digital station
(if available):
Highlight the Language field in step 3 above, and then press x
• to select the language you prefer.
To listen to a second audio program on an analog station (if
available):
Select SAP in step 3 above.
Note:
• A second audio program (SAP) can be heard only on those TV
stations that offer it. For example, a station might broadcast another
language as a second audio program. If you have SAP on, you will
see the current program on the screen but hear the other language
instead of the program's normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station's normal audio
will be output. However, occasionally there is no sound at all in SAP
mode. If this happens, set the MTS feature to Stereo mode.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
On
Stereo