Using Cableclear /Dnr (Digital Noise Reduction); Selecting The Color Temperature; Adjusting The Back Lighting Feature - Toshiba 32HLX95 Owner's Manual

Adjusting the picture
®
Using CableClear
reduction)
®
The CableClear digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal (especially
a Cable channel) or playing a noisy video cassette or disc.
To select CableClear/DNR preferences:
1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
3. Press z to highlight the CableClear/DNR field, and then
press x • to make a selection.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
Advanced Picture Settings
Dynamic Contrast
MPEG Noise Reduction
CableClear
Color Temperature
Back Lighting 100
Reset Done
Note:
• For the current inputs Antenna, Video 1, or Video 2, the menu
will display the text "CableClear. " If the signal is analog, the
available selections are Off, Low, Middle, High, and Auto. If
the signal is digital, the menu will display the text "CableClear"
and will be "grayed out" with "Off" selected.
• For the current inputs built-in DVD, ColorStream HD1,
ColorStream HD2, or HDMI, the menu will display the text
"DNR. " If the video resolution is 480i, the available selections
are Off, Low, Middle, High, and Auto. If the video resolution is
1080i, the available selections are Off, Low, and High. If the
video resolution is anything other than 480i or 1080i, the
menu will display the text "DNR" and will be "grayed out"
with "Off" selected.
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
70
Chapter 8: Using the TV's features
(continued)
/DNR (digital noise
ANT 1
On
Low
Auto
Cool
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Selecting the color temperature

You can change the quality of the picture by selecting from three preset
color temperatures (cool, medium, and warm), as described below.
Mode Picture Quality
Cool blueish
Medium neutral
Warm reddish
To select the color temperature:
1. Press MENU and open the Video menu.
2. Highlight Advanced
Picture Settings and
press ENTER.
3. Press z to highlight
the Color Temperature
field, and then press x • to select the mode you prefer
(Cool, Medium, or Warm).
Advanced Picture Settings
Dynamic Contrast
MPEG Noise Reduction
CableClear
Color Temperature
Back Lighting 100
Reset Done
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
Note: If you select one of the factory-set picture modes (Sports,
Standard, or Movie) and then change the color temperature
mode, the picture mode automatically changes to Preference in
the Picture Settings menu.

Adjusting the back lighting feature

You can use the back lighting feature to adjust the screen
brightness for improved picture clarity.
To adjust the back lighting:
1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
3. Press z to highlight Back Lighting, and then press x • to
adjust the screen brightness (0-100).
Advanced Picture Settings
Dynamic Contrast
MPEG Noise Reduction
CableClear
Color Temperature
Back Lighting 100
Reset Done
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
Video
Picture Settings
Advanced Picture Settings Advanced Picture Settings
Theater Settings
ANT 1
On
Low
Auto
Cool
ANT 1
On
Off
Auto
Cool