Setting The Hdmi™ Audio Mode; Setting The Time And Date - Toshiba 27HLV95 Owner's Manual

Setting the HDMI™ audio mode
To select the HDMI audio mode:
1. Press MENU and open the Setup menu.
2. Highlight HDMI Audio and press •.
3. Press zy to select the HDMI audio mode (Auto, Digital,
or Analog) and press ENTER. (Auto is the recommended
mode). See "Connecting an HDMI or a DVI device to the
HDMI input" on page 21.
Setup
Installation
Auto
Sleep Timer Digital
On/Off Timer
Analog
PC Settings
PC Audio No
HDMI Audio
Auto
Gray Level 2
Navigate Select CH RTN Back EXIT
Chapter 6: Setting up your TV
Exit
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Setting the time and date

Note: If you already set up the TV Guide On Screen™ system, the
time and date were set automatically and you can skip this step.
To set the time and date:
1. Press MENU and open the Setup menu.
2. Highlight Installation and press ENTER. (A new set of
Installation menu icons will appear on-screen, as shown in
step 3 below.)
3. Open the Time And Date menu, highlight Start Setup, and
press ENTER.
Time And Date
Start Setup
Navigate Select CH RTN Back EXIT
If you have not set up the TV Guide On Screen
the following screen will appear. To set the time, highlight
TV Guide On Screen ™ and press ENTER. The TV Guide
™
On Screen setup sequence will start, and the time and
date will be set automatically.
Time And Date
Your TV Guide On Screen system can provide accurate
time and date information.
It is recommended you set up TV Guide On Screen
first and use it to obtain the time and date.
TV Guide On Screen
Manual
If you have already set up the TV Guide On Screen™
system, or if you have not set up the time, the time and
date setting screen will appear and you will need to
manually set the time and date.
Time And Date
Date (MM/DD/YY) 0 6 3 0 / 0 5 /
1 1 1 1 AM :
Time (HH:MM)
Cancel Done
Note:
• If you highlight TV Guide On Screen™ (above) to set the time and
date through the TV Guide On Screen™ system and a power
outage occurs, the time and date will be updated automatically
when the power is restored.
• If you highlight Manual (above) to set the time and date manually
and a power outage occurs, you will lose the time and date settings
when the power is restored.
• If you manually set the time and date and then perform TV Guide
On Screen™ setup, the manual time and date settings will be
overridden by the TV Guide On Screen™ settings.
Exit
™ system,
Cancel
43