®
REGZA-LINK
connection
You can control the basic functions of connected audio/video devices using the TV's remote control if you
connect a REGZA-LINK
operations, see Page 47-49.
To connect an audio receiver and playback
devices, you will need:
HDMI cables (
Page 17)
•
Note:
If several devices are connected, REGZA-
•
®
LINK
feature may not operate properly.
For proper operation, it is recommended
•
that you use HDMI cables with the HDMI
Logo (
).
Chapter 2: Connecting your TV
®
compatible audio receiver or playback device. For an explanation of setup and
Before controlling the device(s):
After completing the above connections, set the
•
REGZA-LINK Setup menu as you desire (
Page 49).
•
The connected devices must also be set. For
details, see the operation manual for each device.
®
•
The REGZA-LINK
feature uses the CEC
technology as regulated by the HDMI standard.
This feature is limited to models incorporating
•
Toshiba's REGZA-LINK
not liable for those operations. Refer to the
individual instruction manuals for compatibility
information.
Note: This feature may not work properly
depending on the devices that are connected.
®
. However, Toshiba is
21