Chapter 3: Using the remote control
Preparing the remote control for
use
The remote control can operate your TV/DVD and
control the basic functions of connected audio/
video devices if you connect a REGZA-LINK
compatible audio receiver or playback device
(
Page 47).
24
Installing the remote control
batteries
1
Remove the battery cover from the back of the
remote control.
®
Squeeze tab
and lift cover
2
Install two AAA size batteries. Match the + and
– symbols on the batteries to the symbols on
the battery compartment.
3
Close the battery cover on the remote control
until the tab snaps.
Caution: Batteries must not be exposed to
excessive heat such as sunshine, fire or the
like.
Note:
Be sure to use AAA size batteries.
•
Dispose of batteries in a designated
•
disposal area.
Batteries should always be disposed of with
•
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
If the remote control does not operate
•
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
When necessary to replace batteries in the
•
remote control, always replace both
batteries with new ones. Never mix battery
types or use new and used batteries in
combination.
Always remove batteries from the remote
•
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.