Toshiba REGZA 46SV670U Owner's Manual page 72

Remote control problems
• Make sure the remote control is set to the correct device
mode (- page 24).
• Remove all obstructions between the remote control
and the TV.
• The remote control batteries may be dead. Replace the
batteries (- page 20).
• Your TV remote control may not operate certain features
on your external device. Refer to the owner's manual for
your other device to determine its available features. If
your TV remote control does not operate a specific
feature on another device, use the remote control that
came with the device (- pages 26–33).
• If the TV still does not act as expected, use the Reset
Factory Defaults procedure (- page 40).
Channel tuning problems
• Make sure the remote control is set to the correct device
mode (- page 24).
• The channel may have been erased from the channel
memory by the Auto Tuning feature. Add the channel to
the channel memory (- page 37).
• The channel may be blocked by the Lock feature.
Unblock the channel (- page 56).
• If you are unable to tune digital channels, check the
antenna configuration (- page 37). If you are still
unable to tune digital channels, clear all channels from
the channel list and reprogram channels into the
channel memory (- page 37). If you are still unable to
tune digital channels, use the Reset Factory Defaults
procedure (- page 40). Also see "TV stops responding
to controls" and "Other problems" (- page 71).
Closed caption problems
• If the program or video you selected is not closed-
captioned, no captions will display.
• If text is not available, a black rectangle may appear.
If this happens, turn off the closed caption feature (-
page 50).
• A closed-caption signal may not display correctly in the
following situations: a) when a videotape has been
dubbed; b) when the signal reception is weak; or c)
when the signal reception is nonstandard (- page 50).
Rating blocking (V-Chip) problems
• If you forget your PIN code: While the PIN code entering
screen is displayed, press E four times within 5
seconds. The PIN code you previously stored will be
cleared (- page 53).
• The V-Chip feature is available for the U.S. V-Chip
system only (- page 54).
No REGZA-LINK operation
• The REGZA-LINK feature is available for Toshiba
REGZA-LINK compatible devices.
• Make sure the HDMI cables with the HDMI Logo
( ) are used.
• When the connected REGZA-LINK device does not work
correctly after you have changed settings of the device,
turn off your TV and unplug the power cord, then plug
and turn on again.
72
Chapter 8: Troubleshooting
• If several devices are connected, REGZA-LINK feature
• Read the instruction manual furnished with the
HDMI problems
For HDMI cables
• Make sure the HDMI cables with the HDMI Logo
For Deep Color
• You should need to use High Speed HDMI cable to work
For Legacy HDMI source
• Some of legacy HDMI sources may not work properly
Media Player problems
• Make sure that devices are connected correctly.
• If you connect a USB device with separate cable or
may not operate properly.
connected REGZA-LINK device.
( ) are used (- page 12).
properly. Normal HDMI cable or DVI cable may not work
with this option (- page 16).
with latest HDMI TV products, due to new standard
adoption. Please try to set Off the HDMI settings (Deep
Color, Lip Sync, RGB Range, INSTAPORT™) (- page
61). Your legacy HDMI source should operate properly
with this TV products.
through USB hub, the TV does not recognize the USB
device.