Learning About The Remote Control - Toshiba REGZA 46SV670U Owner's Manual

Learning about the remote control

The buttons used for operating the TV only are
described here. For the REGZA-LINK remote control
functions, see the section "Using REGZA-LINK
page 59). For a complete list of the remote control's
functions, see the remote control functional key chart
(- pages 22–23).
1
3
6
8
9
13
16
17
20
21
22
Note: The error message "Not Available" may appear if
you press a key for a function that is not available.
1
SLEEP accesses the sleep timer (- page 58).
2
POWER turns the TV on and off. When the TV is on,
the green LED indicator on the TV front will be
illuminated.
Chapter 3: Using the remote control
3
® " (-
4
2
5
6
7
4
8
9
5
7 10 PAGE + / – are used for paging up and down in
11 3 C / # c While watching TV, these buttons open
10
11
12
12 Arrow buttons (BbC c) When a menu is on-screen,
14
13 VOL + – adjusts the volume level.
15
14 CH Bb cycles through programmed channels when
18
19
15 EXIT closes on-screen menus.
16 INFO displays TV status information as well as
17 MUTE reduces or turns off the sound
18 CH RTN returns to the last viewed channel or
23
19 RECALL displays TV status information
20 C.CAPTION opens the closed caption/audio
21 PIC MODE selects the picture mode
22 FREEZE freezes the picture. Press again to restore
23 PIC SIZE cycles through the picture sizes
MODE SELECT sets the four remote control device
modes: TV, CABLE/SAT, DVD, and VCR/PVR.
Press TV until the keypad blinks 3 times to control
the TV.
The selected MODE key blinks each time any key is
pressed. When the Auto Input feature is set, these
keys can also be used to change inputs on the TV
(- page 39).
Channel Numbers (0–9, –/100) directly tune
channels. The = button is used to enter two part
channel numbers (- page 45) or to edit the
Favorites List (- page 42).
INPUT selects the video input source
(- page 41).
FAV BROWSER accesses the Favorites List in the
Channel Browser™ (- page 42).
MENU accesses the main TV menu system
(- pages 34 and 35).
ENTER activates highlighted items in the main menu
system.
THINC accesses the THINC™ menu (- page 34).
channel lists.
the Channel Browser™ and tune to the previous/
next channel in the channel history (- page 43).
these buttons select or adjust programming menus.
no menu is on-screen (- page 44).
program details, when available (- page 62).
(- page 52).
source (- page 45).
(- page 62).
selector screen(- page 50). (The audio selector is
not available for analog channels.)
(- page 49).
the moving picture (- page 48).
(- page 46).
21