Selecting the Power-On Mode
You can select either Power-Saving or Fast mode.
•Power-Saving mode keeps power consumption in
standby mode to below 1W. As a result, it takes a bit
longer for the TV to turn on.
•Fast mode increases power consumption in standby
mode. As a result, the TV will turn on more quickly.
1
From the SETUP menu, highlight Power-On
Mode.
2
Press C or c to select either Power-Saving or Fast,
then press O.
Select Power-Saving for optimal energy efficiency.
Using Blue Screen
With the Blue Screen feature, the screen will turn blue
and the sound will be muted on analog channels and
external input modes when no signal is received.
1
From the PREFERENCES menu, highlight Blue
Screen.
Press C or c to select On, and press O.
2
Setting the screen transparency
You can set the transparency of the on-screen display
system.
1
From the PREFERENCES menu, highlight
Transparency.
2
Press C or c to select Low, Middle, High or Off, and
press O.
40
Chapter 5: Setting up your TV
Viewing the system status
1
From the SETUP menu, highlight System
Information.
Press T to display the system information.
2
Reset Factory Defaults
You can reset all settings and channels to their factory
default values.
1
From the SETUP menu, highlight Reset TV and
press T.
2
Enter your PIN code (if PIN code has been set).
Press C or c to select Yes and press T. The TV will
3
turn off automatically.
To cancel the reset:
Press C or c to select No and press T.
System Information
Software Version
SV670U
1.1.32.0
Feb 25 2009 - 01:06:35
FW: 17