Toshiba 42SL417U Installation Instructions

FIRMWARE INSTALLATION NOTICE
TOSHIBA LCD MODELS
The installation process is simple; however, please read all of the following instructions and notices prior to installation. This software
upgrade is intended only for use with the TOSHIBA Models indicated above.
Notice (Read Prior to Beginning the Software Upgrade)
The following events may interrupt the upgrade process and result in an inoperative unit.
!
If you are experiencing problems or have further questions:
Prior to using this installation procedure, the correct software must be provided on a USB drive by Toshiba or
downloaded to a USB drive from an Authorized Toshiba website. When downloading from a website, extract
the compressed (zipped) files directly to a newly formatted USB drive. Do not alter the file or folder structures.
(Note: When formatting the USB use the "FAT" file system)
Use the following procedure to upgrade the televisions firmware:
Place the LCD TV receiver in the "On" condition.
1)
NOTE: Some personal settings and preferences may need adjusted upon completion of this upgrade. Please
note any personal settings or preferences prior to proceeding to the software upgrade in step 2.
"Insert the USB Flash Drive" into one of the "USB" drive ports on side of TV. (See Fig.1)
2)
Photo may not accurately
represent all models
Figure 1
After insertion of the USB Thumb Drive into the USB port, a software upgrade window will be displayed on the
3)
TV screen similar to what is shown in Figure 2.
Use the "Arrow Right" button of the user remote to select "Yes" in the lower middle area of the software
4)
upgrade window. Press "OK" to begin the software upgrade.
The software upgrade process will begin. During software upgrading, the TV receiver will display a status screen
5)
indicating the software upgrade progress similar to what is shown in Figure 3. (Note: It will take several seconds
for the status bar to begin indicating the progress of the software upgrade) DURING THE SOFTWARE
UPGRADE DO NOT REMOVE POWER TO THE TELEVISION, DO NOT REMOVE THE USB DRIVE, DO NOT
PRESS ANY KEYS ON THE TV OR REMOTE UNTIL THE UPGRADE IS COMPLETED.
Note: An "Upgrading Error" message will be displayed if you attempt to load the unit's current version or
earlier version of software into the LCD TV. This is normal. Only a newer versions of software may be loaded
into the LCD TV.
42SL417U, 46SL417U and 55SL417U
1) Only unplug the AC Power Cord when instructed during the firmware upgrade procedure.
2) Avoid loss or interruption of power during the firmware upgrade procedure.
3) DO NOT Press the power button on the unit during the firmware upgrade procedure.
Customers should contact Toshiba Customer Service at 800-631-3811.
Toshiba Authorized Service Providers should contact Toshiba Technical Support Group.
Insert USB Flash Drive into the "USB" Port
Figure 2
Set to "Yes" and press
"OK" to begin
Firmware Upgrade