Using The Pc Settings Feature; Setting The Pc Audio - Toshiba 26C100U1 Owner's Manual

5無
Press u to select On. When the control panel
is locked and any button on the control panel
(except POWER) is pressed, the message "NOT
AVAILABLE" appears.
To unlock the control panel:
Select Off in step 5 above, or press and hold the
VOLUME – button on the TV control panel for about
10 seconds until the volume icon appears.

Using the PC settings feature

You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN
terminal, you can use the PC Settings feature to
make adjustments to the image. If the edges of the
picture are cut off, readjust the Horizontal Position
and Vertical Position. If the picture is affected by
interference, readjust the Clock Phase and Sampling
Clock.
To adjust the PC settings:
1無
Repeatedly press
( "Selecting the video input source to view"
page 29).
2無
and open the Setup menu.
Press
3無
Highlight PC Settings and press
Note: If a PC is not connected or there is no
pc input signal, this feature will be grayed
out in the Setup menu.
4無
Press p or q to highlight the item you want to
adjust.
5無
Press t or u to make the appropriate
adjustments.
44
26_32C100U1_EN-A5.indb 44
Chapter 6: Using the TV's features
to select PC input mode
.
Note: The screen is disrupted momentarily
when adjusting the PC settings. This is not a
sign of malfunction.
Mode Description
Moves the picture left/right.
Horizontal
The adjustment range is within ±50 from
Position
center.*
Moves the picture up/down.
Vertical
The adjustment range is within ±10 from
Position
center.*
Helps to reduce noise and sharpen the
Clock picture.
Phase The adjustment range is within ±16 from
center.*
Helps to reduce noise and minimize
Sampling periodic vertical stripes on the screen.
Clock The adjustment range is within ±10 from
center.*
Highlight this item then press
Auto
to get an optimum adjustment
Adjust
automatically.
* The default settings may vary depending on
the input signal format.

Setting the PC Audio

This function allows you to output or mute the sound
from your PC when connecting using the PC IN
terminal and an analog RGB cable. ( page 18)
To set the PC Audio:
1無
and open the Sound menu.
Press
2無
Highlight Audio Setup and press
3無
Press p or q to select PC Audio and then press
t or u to select No or Yes.
Yes: When viewing the PC input, the audio from
the PC Audio input can be heard.
No: When viewing the PC input, there will be no
audio.
Note: Because the PC and HDMI-1 inputs
share the same set of analog audio inputs,
the PC Audio menu setting influences the
.
(continued)
2010/3/2 上午 11:28:53