Viewing The System Status - Toshiba 26C100U1 Owner's Manual

Viewing the system status

To view the system status:
1無
and open the Setup menu.
Press
2無
Highlight Installation and press
3無
A new set of Installation menu icons will appear.
Open the System Status menu, highlight System
Information, and press
4無
Press tu to scroll through the menu bar to select
the Factory Defaults or Support Information and
view the related information.
To close the screen and return to the
Installation menu:
Highlight DONE and press
To return to normal viewing:
Press .
Reset Factory Defaults
To reset all settings and channels to their
factory default values:
1無
and open the Setup menu.
Press
2無
Highlight Installation and press
Installation menu icons will appear.
3無
Open the System Status menu, highlight System
Information, and press
4無
Press tu to scroll through the menu bar to select
Factory Defaults.
5無
Highlight Yes and press
6無
(If PIN code has been set, enter your PIN code. Press
t or u to select Done and press
message will appear, select Yes and press
will turn off automatically after a few seconds. After
the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset:
Select No and press
28
26_32C100U1_EN-A5.indb 28
Chapter 5: Setting up your TV
.
.
.
. A new set of
.
.
.) A warning
, the TV
in step 5 above.
2010/3/2 上午 11:28:46