Connecting A Dtv Receiver/Set-Top Box With Colorstream® (Component Video) And A Vcr - Toshiba TheaterWide 20HLK86 Owner's Manual

Connecting a DTV receiver/set-top box with
®
ColorStream (component video) and a VCR
This connection allows you to watch DTV (digital TV), VCR,
and TV programs, and record DTV (composite video only)
and TV programs.
Your TV has ColorStream® (component video) inputs.
Connecting your TV to a DTV receiver with component video
can greatly enhance picture quality and realism.
- To record and watch a DTV program, select LINE IN on the
VCR, and select VIDEO1 on the TV (see
video input source" on page
- To record a TV program while watching a DTV program,
tune the VCR to the channel to record, and select VIDEO2
on the TV.
- To record and watch the same TV program, tune the VCR
to the channel to record, and select VIDEO1 on the TV.
- To record one TV program while watching another TV
program, tune the VCR to the channel to record, and tune
the TV to the channel to watch.
Back of TV
From Antenna
Stereo VCR
14
"Selecting the
23).
From DTV Antenna
Note:
For the highest possible picture quality, use
component video cables between the TV
and DTV receiver/set-top box.
The TV side panel can be used to connect a
VCR with S-video.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States
and other countries, and may subject
you to civil and criminal liability.
DTV Receiver with component video