Connecting A Dtv Receiver/Set-Top Box Or A Satellite Receiver With Colorstream ® (Component Video) And A Vcr - Toshiba 20DL77 Owner's Manual

Connecting a DTV receiver/set-top box
or a satellite receiver with ColorStream
(component video) and a VCR
You will need:
• coaxial cables
• standard A/V cables
– For better picture performance, if your VCR
has S-video, connect an S-video cable
and standard (analog) audio cables to the
VIDEO-1 IN inputs. Do not connect both
types of video cable to VIDEO-1 IN at the
same time or the picture performance will be
unacceptable.
– If you have a mono VCR, connect L/MONO
on the TV to your VCR's audio out terminal
using the white audio cable only.
• standard audio cables
• component video cables
– You can connect the component video
cables (plus audio cables) from the DTV
receiver/set-top box or satellite receiver to
COLOR STREAM HD terminals on the TV.
The COLOR STREAM HD terminal can be
used with Progressive (480p, 720p) and
Interlaced (480i, 1080i) scan systems. A
1080i signal will provide the best picture
performance.
– If your DTV receiver/set-top box or satellite
receiver does not have component video
or S-video, connect standard A/V cables to
VIDEO-2 IN.
To view antenna or Cable channels:
Select the antenna/cable channel input source
on the TV.*
To view DTV programs or satellite programs
using the component video connections:
Turn on the DTV receiver/set-top box or satellite
receiver. Select the Video2/ColorStream input
source on the TV.*
To view the VCR or view and record antenna
channels:
Turn ON the VCR. Tune the VCR to the channel
you want to watch. Select the Video1/S-Video
input source on the TV.*
To record a TV program while watching
another TV channel:
Turn ON the VCR. Tune the VCR to the channel
you want to record, and tune the TV to the
channel you want to watch.
To record and view DTV programs or satellite
programs:
Turn ON the VCR. Select LINE IN on the VCR,
and select the Video2/ColorStream input source
on the TV.*
20DL77_En_new23.indd 17 20DL77_En_new23.indd 17
Chapter 2: Connecting your TV
To record a TV program while watching a
DTV programs or satellite programs:
®
Turn ON the VCR. Tune the VCR to the channel
to record. Select the Video2/ColorStream input
source on the TV* to view the DTV programs or
satellite programs.
* To select the video input source, press INPUT
on the remote control (
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the Copyright
Law and may subject you to civil and
criminal liability.
Stereo VCR
TV lower back panel
From satellite dish
Satellite
IN
Satellite receiver with component video
☞
page 23).
VIDEO AUDIO
L R
IN
OUT
L R
TV upper back panel
AUDIO
OUT
L
Y
P P
B R
COMPONENT VIDEO VIDEO R
S-VIDEO
OUT
OUT
From antenna
IN from ANT
CH 3
CH 4
OUT to TV
L
R
17
6/13/07 3:50:52 PM 6/13/07 3:50:52 PM