Connecting A Dtv Receiver/Set-Top Box With Colorstream (Component Video) And A Vcr - Toshiba AM40 Owner's Manual

Connecting a DTV receiver/set-top box with
®
ColorStream (component video) and a VCR
This connection allows you to watch DTV (digital TV), VCR, and TV
programs, and record DTV and TV programs.
Your TV has ColorStream
TV to a DTV receiver with component video can greatly enhance
picture quality and realism.
From Antenna
Stereo VCR
IN from ANT
From DTV
Antenna
DTV Receiver
with Component video
J3U70221A(E)P11-16
® (component video) inputs. Connecting your
IN
OUT to TV
OUT
CH 3
L
CH 4
VIDEO AUDIO
TV back panel
VIDEO-1 IN
Y
S-VIDEO COMPONENT VIDEO VIDEO
OUT
13
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one set of standard audio cables
• one set of component video cables
Note:
For HDMI connection, see page 15.
The ColorStream HD jacks and HDMI jacks
can be used with Progressive (480p, 720p)
and Interlaced (480i, 1080i) scan systems.
If your DTV receiver does not have compo-
nent video, use the S-video and standard
audio connections instead. Do not connect
both an S-video and a standard video cable to
VIDEO1 at the same time or the picture
performance will be unacceptable.
R
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
AUDIO
OUT
L
R
13
05/08/2005, 10:13 AM