Connecting A Cable Converter Box And A Vcr - Toshiba TheaterWide 20HLK86 Owner's Manual

Connecting a cable converter box and a VCR

This connection allows you to watch and record basic and
premium cable channels, as well as watch videotapes. Set
the TV signal source to VIDEO1
channel 3 or 4 (the same channel as the converter box output
switch), and use the cable converter box to change channels.
Back of TV
Stereo VCR
12
(page 23). Tune the VCR to
Note:
When you use a converter box with your TV,
the remote control will not operate some
features, such as favorite channel
programming or channel return.
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an S-
video cable (in the S-video jacks) instead of
a standard video cable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States
and other countries, and may subject
you to civil and criminal liability.