Changing The On-Screen Display Language; Adding Channels To The Tv's Memory; Programming Channels Automatically - Toshiba TheaterWide 20HLK86 Owner's Manual

Changing the on-screen display language

You can choose from three different languages (English, Spanish,
and French) for the on-screen display of adjustment menus and
messages.
To select a language:
1. Press MENU/ENTER, and then press
menu appears.
2. Press or to highlight Language.
3. Press or to select your desired language.
Special
Language
English
Picture Size
Natural
Timer Setting >
Closed Caption Off
Block Setting >
Backlight Bright
MENU/ENTER EXIT

Adding channels to the TV's memory

When you press CH or CH
channels you program into the TV's channel memory.
Follow the steps below and on the next page to program all active
channels into the TV's memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area
and store them in the channel memory. After the channels are
programmed automatically, you can manually add or erase
individual channels (see
To program channels automatically:
1. Press MENU/ENTER, and then press
Program menu appears.
2. Press to highlight TV/CATV. Select the system (CATV or
TV) that you want to program the channels.
3. Press or to highlight CH PROGRAM.
CH Program
TV/CATV
TV
100%
CH PROGRAM
Add/Erase Add
Favorite Channel >
TV/CATV
Blue Screen On
CH PROGRAM
Add/Erase
MENU/ENTER EXIT
Favorite Channel >
Blue Screen
4. Press or MENU/ENTER to start auto-programming. The
TV will automatically cycle through all the TV and Cable
channels, and store all active channels in the channel
memory.
5. Press CH or CH
or until the Special
Special
Language
Picture Size
Timer Setting >
Closed Caption
Block Setting >
Backlight
MENU/ENTER EXIT
, your TV will stop only on the
page 22).
or
CH Program
TV
100%
CH Program
Add
TV/CATV
CH PROGRAM
On
Add/Erase
Favorite Channel >
MENU/ENTER EXIT
Blue Screen
MENU/ENTER EXIT
to view the programmed channels.
English
Natural
Off
Bright
Note:
• To tune the TV to a channel not
programmed in the channel
memory, you must use the Channel
Number buttons on the remote
control.
• If you press EXIT during auto-
programming, the function will stop
and only the channels programmed
up to that time will be stored in the
channel memory.
until the CH
TV
100%
Add
On
E
F
S
MENU/
ENTER
EXIT
MENU/
ENTER
CH
21