Table of Contents
Advertisement
7
When System Setup prompts you to verify the password,
type it again and press
If the two passwords match, System Setup displays:
Registered
message appears. Repeat steps 6 and 7 to enter the
password again.
8
Press
9
When System Setup prompts you to confirm your
change, Press
Deleting or changing a hard disk drive user only password in
System Setup
To delete or change a user only password in System Setup:
1
Click Start, then click Shutdown, and click OK.
The computer shuts down.
2
Hold down the
button until the on/off light on the system indicator panel
illuminates (green) for approximately one second. When
the following message appears on the screen: "Check
system, Then press [F1] key," press
The System Setup screen appears.
3
Press
screen.
4
Press the spacebar, then type in your user password and
press
5
If you want to change the password, input the new
password.
6
When System Setup prompts you to verify the password,
type it again and press
If the two passwords match, System Setup displays:
Registered
. If the two passwords do not match, an error
to save the change.
End
.
Y
key and press and hold the power
Esc
to move to the HDD PASSWORD section on the
H
.
Enter
. If the two passwords do not match, an error
Toshiba Utilities
Hard disk drive passwords
.
Enter
.
Enter
177
.
F1
Advertisement
Table of Contents
