Table of Contents
Advertisement
1
Locate and press the eject button.
The disc tray partially opens.
2
Grasp the sides of the disc tray and pull it fully open.
3
Remove the disc from the disc tray and place it in its
protective cover.
4
Close the disc tray by pressing gently on the center of the
tray until it clicks, indicating that it is locked.
Removing a disc with the computer off
1
Insert a slender object, such as a straightened paper clip, into
the manual eject button access hole.
2
Pull the tray fully open, remove the disc and place it in its
protective cover.
3
Close the disc tray by pressing gently on the center of the
tray until it clicks, indicating that it is locked.
Caring for CDs and DVDs
❖
Store your discs in their original containers to protect
them from scratches and keep them clean.
❖
Do not bend a disc or place heavy objects on top of it.
❖
Do not apply a label to, or otherwise mar the surface of a
disc.
If the disc is spinning when you open the disc tray, wait for the
disc to stop before removing it.
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
Learning the Basics
Playing DVDs
101
Advertisement
Table of Contents
