Removing A Disc With The Computer On - Toshiba Tecra A3 Series Resource Manual

Sample positioning the disc in the sample drive
7 Gently press the disc onto the center spindle until you
feel the disc click into place.
8 Make sure the disc is completely on the spindle and is
lying flat on the tray.
9 Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
You are ready to use the disc.

Removing a disc with the computer on

1 Locate and press the eject button.
The disc tray partially opens.
2 Grasp the sides of the disc tray and pull it fully open.
3 Remove the disc from the disc tray and place it in its
protective cover.
Using the DVD-ROM or multi-function drive
Be careful not to touch the drive's lens (located underneath the
drive's spindle) or the area around it. Doing so could cause the drive
to malfunction.
Make sure the disc is properly positioned on the spindle. If you
position the disc incorrectly, it can jam the disc tray.
Never press the eject button while the computer is accessing the
drive. Wait for the disk/disc activity light on the system indicator
panel to turn off before opening the disc tray.
41