Seagate Elite ST43401N/ND Reference Manual page 44

36 ST43401N/ND and ST43402ND Reference Manual, Rev. C
continued from previous page
Byte 12 Byte 13 Description
2F 00 Commands cleared by another initiator
30 01 Cannot read medium—unknown format
30 02 Cannot read medium—incompatible format
31 00 Medium format corrupted
31 01 Format command failed
32 00 No defect spare location available
32 01 Defect list update failure
37 00 Rounded parameter
39 00 Saving parameters not supported
3A 00 Medium not present
3D 00 Invalid bits in identify message
3E 00 Logical unit has not self-configured yet
3F 00 Target operating conditions have changed
3F 01 Microcode has been changed
3F 02 Changed operating definition
3F 03 Inquiry data has changed
40 NN Diagnostic failure—more description in ASCQ (Byte 13
codes 80H–FFH)
40 00 RAM failure (should use 40 NN)
41 00 Data path failure (should use 40 NN)
42 00 Power on or self-test failure (should use 40 NN)
43 00 Message error
44 00 Internal target failure
45 00 Select/reselect failure
46 00 Unsuccessful soft reset
47 00 SCSI parity error
48 00 Initiator detected error message received
49 00 Invalid message error
4A 00 Command phase error
4B 00 Data phase error
4C 00 Logical unit failed self-configuration
4E 00 Overlapped commands attempted
53 02 Medium removal prevented
5A 00 Operator request or state change input (unspecified)
5A 01 Operator medium removal request
5A 02 Operator selected write protect
continued