Advertisement
12
ST43401N/ND and ST43402ND Reference Manual, Rev. C
Drives and initiator in one cabinet
Drive
Drive
Notes:
1. Cables and terminators shown are unshielded.
2. Flat cable can be used with single-ended drivers.
Twisted-pair flat cable must be used with differential
drivers.
3. Total length of cables and stubs cannot exceed 25m
(82.0 ft) with differential drivers or 3.05m (10.0 ft)
with single-ended drivers.
Figure 7. Cabling with one cabinet
0
N
Initiator
Terminator
2 x 34 Pin
Connector
68 Conductor
Flat Cable or
Twisted Pair
Terminator
Advertisement
