Directing The Display Output When You Turn On The Computer - Toshiba M10-S405 User Manual

TECHNICAL NOTE: If you are connecting to a television, you
may need to change the display properties. Most televisions
use or support an 800 x 600 standard resolution.
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitor's video cable to the RGB (monitor) port
on the back of the computer.
2 Connect the device's power cable to a live electrical outlet.
3 Turn on the external device.
4 Set the display mode by pressing
Display Properties settings.

Directing the display output when you turn on the computer

Once you've connected an external display device, you can choose
to use the internal display only, the external device only, or both
simultaneously. The quickest way to change the display output
settings is to use the display hot key (
1 Press
2 While holding down
you want takes effect.
This hot key cycles through the settings in the following
order:
❖
❖
❖
Using external display devices
and simultaneously.
Fn F5
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
Getting Started
Fn + F5
+
Fn
, press repeatedly until the setting
Fn F5
, or by setting the
):
F5
67