Table of Contents
Advertisement
2
While holding down
setting you want takes effect. Briefly pause between
pressing the
change.
This hot key cycles through the settings in the following
order:
❖
Built-in display only
❖
Built-in display and external monitor simultaneously
❖
External monitor only
❖
TV
❖
TV and built-in display
❖
DVI appears if you have a projector or a monitor
connected to the DVI video port (DVI is available on
some models)
3
Release the
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
Set the option for the video controller by clicking Start, Control
Panel, Appearance and Themes, and then Display. Choose the
Settings tab, click the Advanced button, select Display Device,
select the applicable Monitor type, and click Apply or OK.
Using external display devices
, press
Fn
key to allow time for the display to
F5
key.
Fn
Getting Started
repeatedly until the
F5
67
Advertisement
Table of Contents
