Directing The Display Output When You Turn On The Computer - Toshiba P100-ST7211 User Manual

66
Getting Started
Using external display devices
❖
A standard television, projector, or VCR/DVD recorder/
player via the S-video Out port.
❖
A projector or a monitor via the DVI video port (DVI
video port is available on some models).
NOTE
Before connecting a television, video projector, monitor or
other external display device, configure your computer for
the type of device you are connecting. To do this, refer to the
documentation for your operating system and the device.
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitor's video cable to the RGB (monitor) port
on the back of the computer.
2 Connect the device's power cable to a live electrical
outlet.
3 Turn on the external device.
4 Set the display mode by pressing
configuring the Display Properties settings.

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
1 Press
DVI stands for Digital Visual Interface, and is a standard for
connecting computers to digital monitors.
and simultaneously.
Fn F5
, or by
Fn + F5
+ ):
Fn F5