Table of Contents
Advertisement
The scrolling and coasting features can be disabled or
changed in the Mouse Properties dialog box.
Using the Control buttons
When a step instructs you to click or choose an item, move
the cursor to the item, then press and release the primary
(left-hand) button. To double-click, press the primary button
twice in rapid succession. The primary button usually
corresponds to the left mouse button.
The function of the secondary (right-hand) button depends on
the program you are using. It usually corresponds to the right
mouse button. Check your program's documentation to
determine if it uses the right mouse button.
Using Tap Zones
The four corners of the Dual Mode Pad are called tap zones.
You can configure each tap zone to perform one of the
following actions when tapped:
❖
Open the Start Menu
❖
Open the current application's menu
❖
Minimize the current application
❖
Maximize the current application
❖
Run a program of your choice
Tap zones can be enabled or changed in the Mouse Properties
dialog box.
Using the Virtual Buttons
The Dual Mode Pad has six virtual buttons and a volume
control bar. Each virtual button can be configured to start an
application. The volume control bar is used to adjust the
system volume level.
Getting Started
Using the Dual Mode Pad
63
Advertisement
Table of Contents
