Table of Contents
Advertisement
The Add Printer Wizard asks you to select your printer.
TECHNICAL NOTE: If your printer is Plug and Play, the
Windows
You can ignore the remainder of this section. See your printer
manual for more information.
5
If the printer you are setting up:
❖
Is not connected to a network, select Local printer
attached to this computer.
If you select Local printer, check "Automatically detect
and install my Plug and Play printer."
❖
Is connected to a network, select Network printer,
or a printer attached to another computer.
6
Click Next.
The Add Printer Wizard prompts you to select your printer.
7
From the list of manufacturers and printers, select your
printer, then click Next.
8
Select the port settings according to the instructions in
your printer's documentation and the port to which your
printer is connected, then click Next.
The Add Printer Wizard prompts you to enter a printer
name.
9
Enter a name for your printer.
HINT: If you are using more than one printer, make sure the
name is descriptive enough to help you tell the difference.
10
To set up the printer to be the default printer for the
operating system, click Yes.
11
Click Next.
Connecting a local printer
®
XP operating system recognizes it automatically.
Getting Started
67
Advertisement
Table of Contents
