Table of Contents
Advertisement
the telephone number for the dial-up connection. To set up
the network connection, use the Dial-Up Networking Wizard:
1
Click Start and point to All Programs.
2
Point to Accessories, then to Communications.
3
Click Network Setup Wizard or Network
Connections.
4
Enter the phone number of your network connection and
let the program dial the number.
The computer connects with the network.
Using the Ethernet LAN Port
When your computer starts, Windows attempts to contact a
Dynamic Host Configuration Protocol (DHCP) server. If the
computer is not connected to a network, it may pause a few
minutes as it waits for a reply. To avoid this delay, you can
reconfigure Windows to disable the LAN port.
TECHNICAL NOTE: You can also use ConfigFree to
reconfigure Windows to disable the LAN port. For procedures,
see
"Using ConfigFree™ with your Toshiba Computer" on
page
194.
To disable the LAN port:
1
Click Start, click Control Panel, then Performance and
Maintenance.
2
Click the System icon, then click the Hardware tab, and
then click the Device Manager button.
3
Select the appropriate network adapter.
4
Click Actions.
5
Select the Properties icon.
Exploring Your Options
Setting up for communications
133
Advertisement
Table of Contents
