Removing A Memory Module - Toshiba M200-ST2002 User Manual

Slot B
(Sample Illustration) Inserting the memory module into the slot
NOTE
14 Replace the memory module slot cover and secure it using the
screw.
15 Re-insert the main battery. For more information on inserting
the main battery, see
16 Turn the computer right side up.
17 Reconnect the cables.
18 Restart the computer.
You can now continue setting up the computer. When the operating
system has loaded, you can verify that the computer has recognized
the additional memory module.
If you are adding extra memory after setting up the computer, verify
that the computer has recognized it correctly as described in
"Checking total memory" on page

Removing a memory module

If you need to remove a memory module:
1 Complete steps
page 48
module slot cover.
For this model Slot A is the bottom slot. Slot B is the top slot.If only one
memory module is to be installed, it must be installed in slot A.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
1–8
to shut down the computer and open the memory
Getting Started
Adding memory (optional)
"Inserting a charged battery" on page
55.
in "Installing a memory module" on
53
Slot A
113.