Geemarc DALLAS 100 VM Manual page 4

1 - connecting telephone
1 - Connect the handset cord.
2 - Connect the line cord to the socket located at rear of
telephone then connect the PTT plug*.
2 - Ringer Volume Setting
A switch located on the right side allows the ringer to be
switched to HI, LOW or OFF
3 - Ringer tone setting
A switch located on the right side allows the melody to
be switched to HI, Middle or LOW.
4 - Wall mounting
To wall-mount your telephone, slide out the clip turn
around and slide back into the wall mounting position
(located in the base unit, just below the ear piece).This
will ensure that the handset stays firmly in position.
SETTING UP SETTING UP
3