Toshiba 2805-S503 User Manual page 97

Going into Standby mode more quickly
You can also put the computer into Standby mode by either
pressing the power button or closing the display panel.
To use any of these methods, you first need to enable them in
Toshiba's Power Saver utility.
1 Open the Start menu, point to Settings, then click Control
Panel.
2 In the Control Panel window, double-click the Toshiba
Power Saver icon. If the Toshiba Power Saver icon is not
present, click View all control panel options on the left side
of the panel.
3 In the Running on batteries area, click the Details button, then
select the System Power Mode tab.
4 Select Standby for the options you want.
❖
When I press the power button
Set this option to Standby for the computer to go into
Standby mode when you press the power button.
❖
When I close the lid
Set this option to Standby for the computer to go into
Standby mode when you close the display panel.
5 Click Override all Modes with settings here.
6 In the Set to range dialog box, do one of the following:
❖
Click DC only for the settings to apply only when you
are using battery power.
❖
Click All for the settings to apply whether you are using
battery power or outlet power.
7 Click OK.
Learning the Basics
Turning off the computer
97