Toshiba 2805-S503 User Manual page 46

2805-s503 user's guide
Table of Contents

Advertisement

46
Getting Started
Setting up your computer
Additional memory comes in 64 MB, 128 MB, and 256 MB
modules. You can only install one module in your computer's
expansion memory slot, located on the bottom of your computer.
NOTE: If your system already has a memory module installed
in the expansion memory slot, you must remove the module
in order to upgrade memory.
You need a standard Phillips no. 1 screwdriver to install a memory
module.
CAUTION: To avoid damaging the computer' s screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
If you are adding memory after you have started to use the
computer, begin at step 1, otherwise skip to step 2.
1
If the computer is on, click Start, Shut Down, select Shut
down, then click OK.
The operating system turns off the computer.
2
Unplug and remove any cables connected to the computer.
3
Close the display panel and turn the computer upside down to
locate the expansion memory slot cover.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents