Connecting to the modem port
2
Plug the other end of the RJ11 telephone cable into the
modular jack of a standard voice-grade telephone line.
Connecting your computer to a network
You can connect your computer to a network locally or
remotely.
Locally, using the built-in Ethernet LAN adapter by
connecting it to a standard RJ45 LAN line.
Remotely, using the built-in modem and a dial-up
connection.
To set up the network connection, use the Network Setup
Wizard:
1
Click Start and point to All Programs.
2
Point to Accessories, then to Communications, and
click Network Setup Wizard.
3
Follow the on-screen instructions.
The computer connects with the network.
Powering down the computer
When you power down the computer, you have a number of
options to choose from:
Turn Off or Shut down, which power off the computer
Learning the Basics
Powering down the computer
93