Sharp MX-2310U Software Setup Manual page 36

MAC OS X
8
Select the hard drive where the PPD file
will be installed and click the [Continue]
button.
• Be sure to select the hard drive on which your
operating system is installed.
• In Mac OS X v10.6 to 10.6.2, the screen below
appears when you click the [Change Install Location]
button.
9
Click the [Install] button.
Installation begins.
If the "Authenticate" window appears, enter the
password and click the [OK] button.
10
When the message "The software was
successfully installed" appears in the
installation window, click the [Close]
button.
This completes the installation of the software. Next,
configure the printer driver settings.
34
11
Select [Utilities] from the [Go] menu.
• If you are using Mac OS X v10.5 to 10.5.8 or v10.6 to
10.6.2, click [System Preferences] in the Apple menu
( ) and select [Print & Fax] (
adding a printer appears, click the
step 14.
• If you are using Mac OS X v10.2.8, select
[Applications] from the [Go] menu.
12
Double-click the [Printer Setup Utility]
icon ( ).
If you are using Mac OS X v10.2.8, double-click the
[Utilities] folder and then double-click the [Print Center]
icon.
If this is the first time you are installing a printer driver
on your computer, a confirmation message will
appear. Click the [Add] button.
13
Click [Add].
). When the screen for
button and go to