Mac Os 9.0 - 9.2.2 - Sharp MX-2310U Software Setup Manual

MAC OS 9.0 - 9.2.2

• If you are using Mac OS 9.0 to 9.2.2, make sure that "LaserWriter 8" has been installed and that the "LaserWriter 8"
checkbox is selected
with your Macintosh computer.
• The CD-ROM does not include software for Mac OS 9.0 to 9.2.2.
Contact your dealer or nearest authorised service representative if you want software for Mac OS 9.0 to 9.2.2.
1
Download the software and save the
extracted files in any folder.
2
Double-click the [MacOS] folder.
Before installing the software, be sure to read "ReadMe
First". "ReadMe First" is in the [US-English] folder
([English] folder in areas other than the U.S.) in the
[Readme] folder.
3
Double-click the [Installer] icon (
4
Click the [Install] button.
5
The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement
and then click the [Yes] button.
6
Read the message in the window that
appears and click the [Continue]
button.
Installation of the PPD file begins.
After the installation, a message prompting you to restart
your computer will appear. Click the [OK] button and
restart your computer.
This completes the installation of the software. Next,
configure the printer driver settings.
7
Select [Chooser] from the Apple Menu.
38
in "Extensions Manager" in "Control Panels". If not, install it from the system CD-ROM supplied
).
8
Create a printer.
(1) Click the [LaserWriter 8] icon.
If multiple AppleTalk zones are displayed, select the
zone that includes the printer.
(2) Click the machine's model name.
The machine's model name usually appears as
[SCxxxxxx]. ("xxxxxx" is a sequence of characters
that varies depending on your model.)
(3) Click the [Create] button.
(1)
(2)
(3)