Polycom VVX410 Phone Manual page 6

Telstra VVX410/411 Phone Guide
Or
Select Maximum Intensity
Select the Up or Down soft key to adjust
the intensity
Press the Back soft key to return to the
previous screen
You can connect an Analogue headset to
your phone. When the headset button is
pressed it illuminates green. All calls
received will be answered through the
headset. When the headset is activated,
Mute and Volume will take effect on the
headset device.
You set up your phone so that all incoming
and outgoing calls use your headset. At any
time you can switch to handset or speaker
mode
From the Home Screen
Select Settings icon
Select Basic
Select Preferences
Scroll down and select Headset...
Select Headset memory...
Scroll down and select Enabled
Press the Home button to return to the
home screen
Telstra VVX 410 Phone Guide | July 2014
To access Headset memory mode, press
headset key twice.
The headset button will flash when enabled
If your phone is unable to perform certain
tasks, a warning icon will display in
the status bar. The warning icon lets you
know that your phone has one or more
issues that you should know about. Contact
your Customer Group Administrator to
advise them of this issue.
From the Home view select the Messages
icon and select
Message Centre...
Enter a passcode, when prompted; after
your initial login you will need to change
your passcode.
It is essential your passcode be changed
for security reasons. It is important to keep
your new passcode private.
Record your name when prompted
Press the hash key (#)
Follow the prompts to save the recording,
or re-record your name
the
Press the Messages button,
the Voice Portal extension.
Enter your passcode followed by the hash
key (#).
Press 1
Press 1 again
Press the Messages button
the Voice Portal extension.
Press the star key (*) during the greeting.
Enter your mailbox ID (your extension).
Enter your passcode followed by the hash
key (#).
Dial the Voice Portal phone number.
Enter your mailbox ID (your extension)
followed by the hash key (#).
Enter your passcode followed by the hash
key (#).
1... Access your Voice Mailbox
2... Change your CommPilot Express
profile†
3... Go to the Greetings Menu
4... Change your Call Forwarding options
6... Make a Call
8... Change your passcode
9... Exit the Voice Portal
#... Repeat this menu
or dial
or dial
Page 6