Polycom VVX410 Phone Manual page 4

Telstra VVX410/411 Phone Guide
Enter the required number to forward your
calls to
Press the Enable soft key
An arrow is displayed on the phone
screen next to your phone number.
Press the Forward soft key
Select Always
Press Disable
To forward your calls to another number if
not answered after a specified number of
rings
Press the Forward soft key
Scroll to No Answer and select
Enter the required number to which to
forward your calls
Scroll to the Forward After Rings field and
enter the required number of rings (20 rings
is the default)
Press the Enable soft key
Press the Forward soft key
Press Call Forward No Answer. Scroll
and select No Answer.
Press the Disable soft key
To forward your calls to another number if
you are engaged on a call
Telstra VVX 410 Phone Guide | July 2014
Press the Forward soft key
Scroll down and select Busy
Enter the required number to which to
forward your calls
Press the Enable soft key
Press the Forward soft key
Scroll down and select Busy
Press Disable soft key
Call Forwarding is not available on Shared
Lines
When you enable Do Not Disturb (DND),
you prevent your phone from ringing. All
incoming calls are sent directly to
voicemail. All calls received while DND is
enabled, will be displayed in your Recent
Calls list
From Line View
Press the Do Not Disturb soft key
The Do Not Disturb icon displays on
screen when enabled.
Or
From Home View
Navigate to and select DND icon
From Line View
Press DND soft key, and DND is disabled.
Or
From Home View
Select DND
The Do Not Disturb Service has been
turned off.
While engaged in one call:
Press the More soft key and select the
Confrncn soft key
Enter the required number or extension of
the second party
When the call connects
Press the More soft key and select the
Confrncn soft key
All parties are connected in a three-way
call.
To end the conference
Press the End Call soft key
Note: If either of the other two parties hang up,
your call with the remaining party stays intact. If
you hang up, the other two parties will be
disconnected
Note: There can be a maximum of 3 parties on
a conference call, unless you have the
Executive service pack which has the N-Way
feature which enables a total of 8 parties on a
Conference call.
To add a contact:
Page 4