Table of Contents
Advertisement
Setting
Head Close
Label Top
Left Position
Reprint Mode
Format Convert
Note
If printing from the downloaded software/driver, the software/driver commands will overwrite the
settings set from the screen.
Set the media action when you close the Print Head.
Action
Feed
The printer ejects one label.
The printer calibrates the sensor levels,
Calibration
determines the label length, and feeds one label.
The printer determines the label length and feeds
Length
the label.
No Motion
No action.
Adjust the print position vertically on the label. Settings range from
-120 dots to +120 dots.
Adjust the print position horizontally on the label. Settings range from
-9999 dots to +9999 dots.
Reprint the last label by selecting the up arrow (
screen.
Selects the bitmap scaling factor. The first number is the original DPI
value; the second number is the DPI setting you want.
Description
Description
66
) button on the
Advertisement
Table of Contents
