Table of Contents
Advertisement
Setting
Print Mode
Offset
Shift X
Shift Y
Reference X
Reference Y
Code Page
Country
Note
If printing from the downloaded software/driver, the software/driver commands will overwrite the
Printer settings.
Set the Print Mode.
Print Mode
Batch Mode
When the image is printed, the Gap/Black Mark is fed
through the tear plate for tear away.
None
The top of the next label is aligned with the Print
Head burn line (Tear Off Mode).
Cutter Batch
Cuts the label once at the end of the printing job.
Rewinder Mode Enables Rewinder Mode.
Peeler Mode
Enables Peeler Mode.
Cutter Mode
Enables Cutter Mode.
Fine-tune the media stop location. Settings range from -999 dots to 999
dots.
Fine-tune the print position. Settings range from -999 dots to 999 dots.
Set the origin of the printer coordinate system horizontally and vertically.
Settings range from 0 dots to 999 dots.
Set the international character set code page.
Set the country code. Settings range from 1 to 358.
Description
Description
63
Advertisement
Table of Contents
