3. Place the label roll on the Label Supply
Spindle and then flip the Label Roll Guard
upwards to hold it in place.
Note
•
Make sure the label print side is
facing up.
•
(TJ-4422TN/TJ-4522TN)
To detect the remaining amount of
the media in the label roll, slide the
Media Level Sensor up.
4. (TJ-4420TN/TJ-4520TN/TJ-4620TN)
Push the Print Head Release Lever and
thread the label through the Damper,
Media Sensor, and Front Label Guide to
install the media.
(TJ-4422TN/TJ-4522TN)
Push the Print Head Release Lever and
thread the label through the Media Guide
Bar, Damper, Media Sensor, and Front
Label Guide to install the media.
(TJ-4420TN/TJ-4520TN/TJ-4620TN)
(TJ-4422TN/TJ-4522TN)
24