Advertisement
Safety Information
To avoid possible eye damage caused by hazardous radiation, never look
directly into optical output connectors. Some sources produce invisible
radiation that can permanently damage your eyes.
To avoid possible fire, electric shock, or personal injury, do not open the
case; no user-serviceable parts are inside.
Verifying that the FiberInspector Option is Enabled
Before you use a FiberInspector probe purchased separately from the OptiFiber
tester, verify that the FiberInspector option is enabled on your tester.
To verify that the option is enabled, press F on the tester; then select
OptiFiber Options
Fluke Networks for assistance.
Using the Probe
Figure 1 shows how to use the probe.
Some adapter tips have small screws that slide into a slot on the probe
end. Do not adjust this screw.
See the tester's online help or the OF-500 OptiFiber Technical Reference Handbook
on the OptiFiber Product Manuals CD for details on FiberInspector functions.
. If the FiberInspector option is not shown as "INSTALLED" contact
WWarning
Caution
Enable
Advertisement
