Mercedes-Benz A-Class 2021 Operator's Manual page 186

184 Driving and parking
You have adopted a sporty driving style with
R
high cornering speeds or high rates of accel‐
eration.
®
When ESP is deactivated.
R
If a loss of tire pressure or a faulty tire has
R
been detected and displayed.
If you deactivate the Active Lane Keeping Assist
warning and the lane markings cannot be clearly
detected, it is possible that no lane correcting
brake application takes place ( page 184).
/
The system may be impaired or may not function
particularly in the following situations:
If there is poor visibility, e.g. due to insuffi‐
R
cient illumination of the road, if there are
highly variable shade conditions or in rain,
snow, fog or heavy spray.
If there is glare, e.g. from oncoming traffic,
R
the sun or reflections.
If the windshield in the area of the multifunc‐
R
tion camera is dirty, or if the camera is fog‐
ged up, damaged or covered.
If there are no lane markings, or several
R
unclear lane markings are present for one
lane, e.g. around roadworks.
If the lane markings are worn, dark or cov‐
R
ered.
If the distance from the vehicle in front is too
R
short and thus the lane markings cannot be
detected.
If the lane markings change quickly, e.g.
R
lanes branch off, cross one another or
merge.
If the road is very narrow and winding.
R
Vehicles with Driving Assistance Pack‐
R
age: if the radar sensors in the rear bumper
are dirty or covered in snow and an obstacle
is detected in your lane, no lane-correcting
brake application takes place.
Activating/deactivating Active Lane Keeping
Assist
Multimedia system:
© Settings Quick Access
4 5 5
Active Lane Keeping Assist
5
Activate or deactivate the function.
#
Setting Active Lane Keeping Assist
Multimedia system:
© Settings Assistance
4 5 5
Active Lane Keeping Assist
5
Activating or deactivating the haptic warning
Select Warning.
#
Activate or deactivate the function.
Function of adaptive damping adjustment
Suspension with adaptive damping adjustment
continuously adjusts the characteristics of the
suspension dampers to the current operating
and driving conditions.
The damping is set individually for each wheel
and is affected by the following factors:
the road surface conditions
R
vehicle load
R
the drive program selected
R
the driving style
R
The drive program can be adjusted using the
DYNAMIC SELECT switch.