Auto Play; S-Vhs Playback - Samsung DVD-V4600 Instruction Manual

Auto Play

If you want your videotapes to play automatically when
you insert them, turn on Auto Play.
NOTE: Only tapes that are missing the Record Safety
Tab will play automatically when inserted.
1 Open the "MENU"
With the VCR in Stop or Play mode, press the
MENU button.
2 Select "VCR"
Using the UP/DOWN buttons, move the selection
bar to "VCR" then press ENTER to select.
3 Select "Tape Length"
Press the RIGHT button to select the Tape Length.
This information is usually printed on the tape box.
The menu cycles through: T-120, T-160 or T-180.
Once the type of cassette is set, the VCR can
display the amount of time remaining on the tape
when you press the INFO. button.
4 Select "Auto Play"
Move the selection bar to "Auto Play," then press
right button to select from the following options:
• On - The VCR will automatically begin playing a
video tape when it is inserted, as long as the
safety tab of the cassette has been removed.
• Off - Auto play is disabled.
T-120
T-160
n
T-180
On
n
Off
5 Select "Auto Repeat"
Move the selection bar to " Auto Repeat". It sets the
VCR to play a tape repeatedly [unless a tape
control is activated (stop, fast forward or rewind)].

S-VHS Playback

The DVD-VCR allows you to playback high quality
S-VHS tapes.
1 Insert a S-VHS Tape
Insert an S-VHS tape into the VCR deck.
2 Start Playback
Press ❿ll (PLAY/PAUSE) on the remote control to
begin playback of the S-VHS tape.
ENG-29
n
Off
On