Casio SR-C4500 Quick Reference Manual page 6

6
INSTALLING THE JOURNAL PAPER
STEP ONE:
Remove the printer cover.
STEP TWO:
Open the platen arm.
STEP THREE:
Ensuring the paper is being fed
from the bottom of the roll,
lower the roll into the space
behind the printer.
STEP FOUR:
Put the leading end of the paper
over the paper cutter.
STEP FIVE:
Close the platen arm slowly
until it locks.
STEP SIX:
Remove the paper guide of
the take-up reel.
STEP SEVEN:
Slide the leading end of the
paper into the groove on the
spindle of the take-up reel and
wind it onto the reel two or
three times.
STEP EIGHT:
Replace the paper guide of the
take-up reel.
Place the take-up reel into place
behind the printer, above the
roll paper.
STEP NINE:
Press the "JOURNAL FEED" key
to take up any slack in the paper.
During the installation, press
the "JOURNAL FEED" key after
power on.
STEP TEN:
Replace the printer cover.