Advertisement
<D
The distance to the back of the green
The distance to the middle of the green or selected pin position
@
The distance to the front of the green
@
©
The current hole number
The par for the current hole
@
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press @.
2 Select Move Flag.
3
Press UP or DOWN to move the pin position.
4
Press@.
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Hazards
You can view distances to hazards along the fairway for par 4
and 5 holes. Hazards that affect shot selection are displayed
individually or in groups to help you determine the distance to
layup or carry.
1
From the hole information screen, press @.
2 Select Hazards.
• The distances to the front
hazard appear on the screen.
• The hazard type
is listed at the top of the screen.
@
• The green is represented as a half circle
the screen. The line below the green represents the center
of the fairway.
• Hazards
are shown below the green in approximate
@
locations relative to the fairway.
3
Press UP or DOWN to view other hazards for the current
hole.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press @.
6
<D
and back
of the nearest
@
©
at the top of
fairway,
the device records
2
Select Measure Shot.
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball
again,
putt on the
green,
3
Press DOWN to view
all
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information
2
Select Layups.
Each layup and the distance
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
(Viewing Layup and Dogleg Distances, page
1 Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2
From the hole information
3
Select Custom Targets.
4
Select a target type.
Keeping Score
1
From the hole information
2
Select Scorecard.
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press@ to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a
Score
1
From the hole information
2
Select Scorecard.
3
Press UP or DOWN to scroll through the holes.
4
Press@ to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information
2
Select the activity settings.
3
Select Scoring Method.
4
Select a scoring method.
About Stableford Scoring
When you select the Stableford scoring method (
Scoring Method, page
6),
points are awarded based on the
number of strokes taken relative to par. At the end of a
the highest score wins. The device awards points as specified
by the United States Golf
Association.
The scorecard for a Stableford scored game shows points
instead of strokes.
· ·
1®3fiMffl;GMl®ltt1ii �
� 2or more over
or move to the next hole.
recorded shot distances.
screen,
press@.
until
you reach each layup
6).
screen,
press@.
screen,
press@.
screen,
press@.
screen,
hold MENU.
Setting the
_
Activities and Apps
round,
Advertisement
