Advertisement
Getting Started
Required Computer Specifications
Windows XP/Windows Vista/Windows 7 (32-bit or 64-bit versions)
Operating system
Core 2 Duo or greater, 1 GB or greater
CPU and memory
CD-ROM drive
Media drive
1024×768 pixels, 16-bit color or greater
Video card and dis-
play
Visit the Roland DG web site (http://www.rolanddg.com/) for the latest information.
(*1) This software is a 32-bit application and therefore runs in WOW64 (Windows-On-
Windows 64) when running on 64-bit versions of Windows operating systems.
(*2) This software has not been tested when running in the Windows XP mode in Windows
7.
Assembly and Software Installation
Step 1:
Assembly
Included
Items
Turn the main unit upright and lock it with the hooks.
Setting board
v
Attach the front and rear covers.
w
Attach the side covers.
x
Close all covers.
Other Documentation Provided For This Machine
The following documentation is included with the machine in addition to
this document.
iModela (iM-01) Master Guide (PDF)
This guide contains detailed explanations of the machine's features, mainte-
nance methods, and troubleshooting information. It is a part of the included
Roland Software Package.
NC Code Reference Manual (PDF)
Read this manual when you want to perform NC code programming. It is a
part of the included Roland Software Package.
Step 2:
Things you will need
Retainer
Do not connect to the PC at this time.
If you connect the cables to the PC, you may not be able to install the Windows
driver. Connect the cables to the PC when you install the software.
Step 3:
Step 4:
Things you will need
Software that will be installed
iModela Creator
iModela Controller
iModela Driver
iModela Manuals
Virtual Modela
SFEdit2
Connecting the Cables
AC adapter, power cord
(1 of each)
WARNING
Do not use this machine with a power supply that does
not meet the ratings displayed on the AC adapter.
Doing so may lead to fire or electrical shock.
WARNING
Do not use AC adapters or power cords other
than those that are included with the machine.
Doing so may lead to fire or electrical shock.
WARNING
Handle the AC adapter, power cord, plug, and electrical outlet
correctly and with care. Never use any damaged items.
Using damaged items may lead to fire or electrical shock.
WARNING
When using extension cords or power strips, make
sure they are rated higher than the machine's
ratings for voltage, frequency, and amperage.
There is a risk of fire when many loads are connected to one
electrical outlet or when using long extension cords.
Turning the Machine On
Installing the Software
Roland Software Package (1)
Used to create output data.
Used to control the machine, confirm operation status, perform
maintenance, etc.
Driver software required for sending data from the computer to the machine.
Displays the Master Guide and the NC Code Reference Guide.
Used to view a 3D preview of data created with iModela Creator and
confirm the result of the process before actually cutting.
Used to extract the center line of fonts in order to create designs that use letters.
USB cable (1)
Press the power button.
Initialization begins. When
the green lamp switches from
flashing to on, the initialization
has finished.
Advertisement
