Adjusting the ND Filter for Dia-illumination (Motorized ND Filter Wheel)
1.13
To adjust the transmittance of the ND filter in the motorized ND filter wheel, use the [ND WHEEL] button.
Prerequisite for motorized operation
A motorized ND filter wheel must be attached to the microscope in order to perform the following operation.
Display Status of the [ND WHEEL] Button
[MICROSCOPE CONTROL] Screen
Ni-E
Displayed by default
(For details on displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed".)
[Procedure]
(1)
Press the [ND WHEEL] button.
(2)
Move the slider to adjust the transmittance.
Chapter 5
Individual Operations
[MIC EASY] Screen
Can be displayed by setting
[MICROSCOPE CONTROL] Screen
[MIC EASY] Screen
1-57
Current ND filter transmittance