Table of Contents
Advertisement
Button Icon
[ESCAPE]
[Specimen Removal
Position]
[SLEEP]
Selecting the Buttons to be Displayed
4.1.1
[Procedure]
[MIC SETUP] → [BUTTON FUNC]
(1)
(To change the configuration of the [MICROSCOPE
CONTROL] screen)
Press the [MIC BUTTON FUNCTION] button.
(To change the configuration of the [MIC EASY]
screen)
Press the [MIC EASY BUTTON FUNCTION] button
under [MIC EASY].
Current settings are displayed.
(2)
Select the button of which you want to change the
function assignment.
A sub screen to select a function appears.
Pressing the [ALL CLEAR] button clears settings for all
buttons.
Chapter 6
Main Category
Shown in [MICROSCOPE
of Direct
CONTROL] Screen
Operation
Ni-E
Buttons
Displayed on
[XYZ]
sub screen of
[XYZ] button
Displayed on
[XYZ]
sub screen of
[XYZ] button
Set separately.
Refer to "4.1.2
Showing/Hiding
-
the [SLEEP]
Button" in this
chapter.
1-99
Settings
Shown in [MIC EASY] Screen
Ni-U
Ni-E
N
N
N
(Although the following screens are example for
[MICROSCOPE CONTROL] screen, operation is
similar for [MIC EASY] screen.)
Ni-U
Y
N
Y
N
Y
N
Advertisement
Table of Contents
Troubleshooting
