Direct Operation with [Objective (Address)] Buttons
Display Status of [Objective (Address)] Buttons
[MICROSCOPE CONTROL] Screen
Ni-E
Can be displayed by setting
Ni-U
Displayed by default
Ci-E
-
(For details on displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed".)
[Procedure]
Press an [Objective (Address)] button.
The objective is switched. The button for the currently selected
objective is highlighted (with a check mark on the
[MICROSCOPE CONTROL] screen, or with a yellow frame on
the [MIC EASY] screen).
Interlocking other motorized devices with the
switching of objective (Ni-E only)
The following operations can be configured to be
automatically performed when the nosepiece is rotated to
switch the objective.
Retraction of the microscope's elevating section and its
restoration after switching of the objective that follows
Aperture diaphragm adjustment on the motorized
universal condenser
DIA field diaphragm adjustment on the Ni-E microscope
main unit
ND filter transmittance adjustment on the motorized ND
filter wheel
Switching of the module in the motorized universal
condenser
Switching of Ni-E microscope's elevating section
movement speed
Switching of motorized XY stage movement speed
Correction of the focal position
*1 Disabled when the intelligent nosepiece is turned manually.
For details, refer to Chapter 6, "5.1.1 Configuring the
Interlocked Operation with Switching of Objectives", "5.1.3
Automatically Switching the Movement Speed of the
Microscope's Elevating Section and Motorized Stage", and
"5.1.4 Configuring the Parfocal Correction Function (Auto
Link Focus)".
Press the [LINK] button to go directly to the setting screen.
Chapter 5
Individual Operations
[MIC EASY] Screen
Can be displayed by setting
Can be displayed by setting
Cannot be displayed
*1
*1
1-39
[MICROSCOPE CONTROL] Screen
Nosepiece address
Series (abbr.)
Magnification, immersion type
[MIC EASY] Screen
Nosepiece address
Series (abbr.)
Magnification