Osd(On Screen Display) Information; Starting Play Mode; Playing Back A Still Image - Samsung DIGIMAX A503 User Manual

OSD(On Screen Display) information

■In any mode with the exception of VOICE
RECORDING mode, you can check the recording
status in the LCD monitor.
■Idle mode : If you select the [SAVE MODE] and the
camera isn't operated during the
specified time(about 30 SEC.), the
camera power will be idle (LCD monitor
: OFF, Camera status lamp : Blinking) automatically.
- To use the camera again, press any of the camera buttons except the power
button.
- If there is no operation during the specified time, the camera power will be
turned off automatically to save battery life. Refer to page 50 for more
information about the auto power off function.
[Full information mode]
OSD INFORMATION
FULL OSD
BASIC OSD
SAVE MODE
[Basic information mode]

Starting play mode

■If the memory card is inserted in the camera, all the camera functions apply only
to the memory card.
■If the memory card is not inserted in the camera, all the camera functions apply
only to the internal memory.
■If you have turned on the camera by pressing the POWER button, you can press
the PLAY MODE button once to switch to Play mode and press it again to switch
to Recording mode.
■You can turn the power on with the play mode button. The camera is turned on in
play mode. Press the play mode button again to switch to shooting mode.
■You can set up the PLAY mode function by using the camera buttons and LCD
monitor.
● Playing back a still image
1. Select the PLAY mode by pressing the play
mode button ( ).
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to play back by
pressing the LEFT/ RIGHT button.
※ Press and hold the Left or Right button to fast
forward the images played.
《33》