Starting The Slide Show - Samsung DIGIMAX A503 User Manual

Starting the slide show

■ Images can be displayed continuously at pre-set intervals. You can view the
slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT / RIGHT button and select the [SLIDE] menu tab.
● Start the slide show : The slide show can start only in the [SHOW] menu.
1. Use the Up/ Down buttons to select the [SHOW]
menu and press the Right button.
2. Select a desired sub menu by pressing the Up/
Down button.
[PLAY] : The slide show is closed after one
cycle.
[REPEAT] : The slide show is repeated until
cancelled.
3. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button (
- To stop the slide show, press the Pause button and then press LEFT/
RIGHT button.
SLIDE
SHOW PLAY
INTERVAL REPEAT
EFFECT
BACK:
) again to resume the slide show.
● Setting play interval: Set the slide show play interval.
1. Use the Up/ Down buttons to select the
[INTERVAL] menu and press the Right button.
2. Use the Up/ Down buttons to select the desired
interval.
3. Press the OK button to save the configuration.
INFORMATION
● The loading time depends on the image size and quality.
● While the slide show is playing, only the first frame of a MOVIE file is
displayed.
SET:OK
● While the slide show is playing, the voice recording file will not display.
● Configure slide show effects : Unique screen effects can be used for the slide show.
1. Select the [EFFECT] sub menu by pressing the
UP / DOWN button and press the RIGHT button.
2. Use the Up / Down button to select the type of
effect.
[OFF] : Normal display.
[E1] : Image is displayed slowly from the left.
[E2] : Image is displayed slowly from the centre
outwards.
[E3] : Image moves from the top left.
[E4] : The image slides diagonally from top left to bottom right.
[MIX] : The image slides irregularly.
3. Press the OK button to confirm the setting.
SLIDE
SHOW 1
INTERVAL 3
EFFECT 5
10
BACK: SET:OK
SLIDE
SHOW OFF
INTERVAL E1
EFFECT E2
E3
BACK: SET:OK
《41》